8/3 UF wire is an underground feeder and branch circuit wiring cable. It can be used as an underground feeder from an existing building to outdoor lighting fixtures, pumps, outbuildings and other equipment.
Type NM-B nonmetallic-sheathed cable may be used for exposed and concealed work in normally dry locations at temperatures not to exceed 90 degree C. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads.
Heavy-duty 50 Amp locking cord for connecting RV park power to an RV, camper, trailer, or vehicle with a 50 Amp inlet. It can also connect a generator to a house.
The cord uses 100% copper wire coated with PVC. It has finger-grip plugs, 90-degree heads, a strain-relief structure, and includes a storage bag and strap.
CircleCord 50 Amp RV/generator power cord with a 14-50P male plug and SS2-50R twist-locking female connector. The 90-degree right-angle design reduces stress on the cord and power inlet.
The STW pure copper cord has heavy-duty, flame-retardant, heat-resistant, UV-resistant PVC coating. Ergonomic grip handles assist with plugging and unplugging.
The EZ Generator Switch is a single-circuit manual transfer switch for selected electrical loads. It is rated 15 Amp and 125-volt in the generator position and 20 amp in the normal position.
The pre-wired unit includes 24-inch leads, wire nuts, a back box, and directions with a wiring diagram. It can be converted for bonded or floating-neutral generators.
The Fieldpiece SC680 wireless power clamp meter is designed for HVACR measurements. It supports power measurement, phase rotation, DC amps, diode testing, and dual temperature measurement for Delta T.
The meter integrates directly with the Job Link app without a JL2 transmitter. It includes a swivel head, heavy-duty magnet, dual Type K temperature ports, and RCT2 probe tips.
The Intermatic WH40 time switch provides basic control of electric hot water heaters. Its easy-to-set yellow dial is designed for dependable electric water heater control.
Type NM-B nonmetallic-sheathed cable for exposed or concealed work in normally dry locations. It is primarily used in residential branch circuits for outlets, switches, and other loads.
The SNAKOL SK-88C is an external magnetic analog multimeter with a pointer display. It supports AC and DC voltage testing up to 2500V, 10A DC current measurement, battery testing, and diode or LED detection.
Southwire 12-2 UF-B cable is designed for underground feeder use, including direct earth burial in branch circuits and indoor wiring in wet or corrosive locations. It may be used for exposed or concealed wiring, general branch circuits, and new or replacement wiring.
The cable has copper conductors and a gray, sunlight-resistant jacket. It is resistant to moisture, fungus, corrosion, acids, alkalis, corrosive fumes, chemicals, lubricants, and ground water.
Southwire 28828228 12/2 100′ yellow NM-B indoor residential electrical wire with ground. The solid wire is intended for interior residential applications and has a SIM Technology jacket for wire pulling ease.
Southwire Romex NM-B SIMpull copper solid conductor cable for exposed or concealed work in normally dry locations. It is primarily used for residential branch circuits for outlets, switches, and other loads.
The SlikQuik infused membrane jacket is designed to reduce pulling force for easier installation.
NM-B indoor electrical copper ground cable in white.
This VEVOR generator cord and power inlet box kit is designed for home or RV backup power. The 50-foot cord has a NEMA 14-50P male plug and a twist-lock NEMA SS2-50R female plug.
The kit includes a pre-drilled inlet box with a flip cover and indicator light, plus a carrying strap and storage bag.
Current: Up to 50 AMP
Cord gauge: 6/3+8/1 AWG STW
Cord wiring: Pure copper
Cord jacket: Flame-retardant PVC
Inlet box: Pre-drilled holes with detachable plug
Connection: Twist-lock female connector
Certification: ETL certified
This VEVOR 50FT generator power cord has a 50AMP, 125/250V, 12500W rating. It uses pure copper wires in a 6/3+8/1 cable configuration with 3 wires at 6 AWG and 1 wire at 8 AWG.
The cord has twist-lock connectors with a locking ring design and includes an ergonomic grip and plastic strap for storage. It is intended for generator connections to a power receptacle or electrical connection.
Your Shopping Cart is Empty
Continue Shopping